New windshield leaks, sealing options?

"Demon-Xanth knows how to operate a street." (demon-xanth) 01/27/2020 at 15:29 • Filed to: None

0

6

We had the windshield replaced on our van, and now it leaks slowly when it rains. I think the top corners don’t match right. Any thoughts on what to put in to make it work?

Thisismydisplayname > Demon-Xanth knows how to operate a street. 01/27/2020 at 15:45

8

There is a flowable silicone that might work, but why not go back to the installer for a repair?  

facw > Demon-Xanth knows how to operate a street. 01/27/2020 at 15:46

3

Warranty?

Demon-Xanth knows how to operate a street. > Thisismydisplayname 01/27/2020 at 15:54

0

Given how the curve is off, I’m not entirely convinced they are capable.

GoodIdeaAtTheTime > Demon-Xanth knows how to operate a street. 01/27/2020 at 16:18

2

How long ago was it? I would have them do it again. 

You can tell a Finn but you can't tell him much > Demon-Xanth knows how to operate a street. 01/27/2020 at 19:02

1

They could have gotten a bad piece of glass. I’d bring it back. Best case they fix it under warranty, worst case they say they’ll charge you and then you try fixing it on y our own.

monkey like shiny > Demon-Xanth knows how to operate a street. 01/27/2020 at 23:50

3

Hey bud, I’m in the autoglass industry and SILICONE is a NO NO when it comes to windshields. If you are to attempt a plug then get POLYURETHANE. It’s what the manufacturer and windshield replacement companies use. I recommend taking it back to the company that replaced it. Some main causes for leaks are either a bend in the glass, improper decking or a bad seam where the ends of the urethane aren’t fully joined and a tiny pin hole lets water in. Their work should be covered by a warranty.